XGJ 580 Biomass Pellet Machine On Sale(CE Approved)
Application:
1. Yulong biomass pellet machine on sale is applied to the materials with low adhesiveness and low shaping, such as the rice husk, sunflower seed husk, peanut shell and other fruit shell; Branch, trunk, bark and other wood waste; A variety of corp straws, rubber, cement, ash and other chemical materials.
2. This type of biomass pellet machine on sale is widely used in the biomass energy fuels plant, power plant, wood processing plant, fertilizer plant, chemical plant etc. It is the ideal pressing shaping equipment with low investment and high profit.
Advantages:
1. Hot sale biomass pellet machine on sale: Vertical die, feeding vertically; No arching of raw materials, easy for heating dissipation.
2. Hot Sale biomass pellet machine on sale: Die fixed, rollers rotating, materials centrifugal, evenly distributed around. Double-layer dies, up and dowm dual-use, high capacity, saving energy.
3. Hot sale biomass pellet machine on sale: Independent lubrication, high pressure filtration, clean and unblocked.
4. Hot sale biomass pellet machine on sale: Independent and frequency changeable cutting device, ensure formation rate of pellets.
Differences:
1. Upward mould, special structure, vertically feeding, easier heat dissipation: The material is feeded into the pelletizing room vertically and is well placed, no other pressing device is needed. The feed inlet of biomass pellet machine on sale is set in one side, so light material is hard to get into the pelletizing room and other special force pressing device is needed, what's more important, the lifetime of gearing(gear, bearing) is shorten as the pelletzing room couldn't dissipate the heat and be cooled. Flat die pellet mill has two structures, but both have many disadvantages that are hard to get rid of even they can be feeded vertically. (1) die rotates to make rollers run, the output will be effected as material is easily arched which lead to uneven feeding. (2) When the rollers rotate while the die is static, which could avoid the arching of material, but centrifugal force is caused which will swing the material in the pelletizing room of biomass pellet machine on sale to the periphery. And that will cause the upward flat die with evenly distributing pellet holes in it has no material to press in the center, then material piles up unevenly in thickness.
2. Die static, roller rotating, material centrifugal and distributed around evenly: Using a unique double-layer high rebounding-effect die, naturally and evenly distribute in the die's inner surface. Normally rollers are static, die rotates, no centrifugal force, unevenly distributed material. Normally biomass pellet machine on sale rollers rotate to generate centrifugal force, but the die hole is inconsistencies with the material force.
3. Double-layer die, multi-function, high efficiency
Die has upper parts and lower parts, customers can choose two different specifications of aperture to produce different specifications of pellets. When pelletizing good bonding materials, we can heighten the rollers and two-layer dies to reach four-fold capacity. No flat die or ring die pellet mill can do this.
Technical parameter:
Model
|
Power
(kw)
|
Pellet Size
(mm)
|
Output
(t/h)
|
Weight
(t)
|
Size(mm)
|
XGJ550
|
75
|
4-10
|
0.8-1
|
6.04
|
2630×100×2400
|
XGJ560
|
90
|
4-10
|
1-1.5
|
6.1
|
2600×1300×2300
|
XGJ580
|
160
|
4-10
|
1.5-2
|
7
|
2900×1300×2400
|
XGJ850
|
220
|
4-12
|
2-3
|
14.5
|
3300×1400×3100
|
XGJ880
|
315
|
4-12
|
3-4
|
18
|
3800×1680×3400
|
XGJ1050
|
365-450
|
4-30
|
5-6
|
25
|
3980×2060×3450
|
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}