Long Working Life 8th Pellet Machine From Yulong sawdust wood pelletizer machine
Product Description
Biomass pellet machine is a kind of pellet equipment commonly used in biomass energy industry. It is a new type of fuel molding machine which can replace coal by crushing biomass raw materials such as tree branches and straw into rod-shaped particles. The 8th Generation Centrifugal Wood Pellet Mill combines the advantages of the traditional horizontal ring-die and flat-d granuielator. It is especially suitable for biomass granulation.
Detailed Photos
Our advantage:
1.The shell of new pellet dialing system (XGJ560 model) is made of 304 stainless steel, which molded by a stamping forming, high strength, anti-wear and corrosion resistance.
2. The position of pellet outlet and the position of the dialing disc's reducer can be selected and adjusted at will. Theuser can change their position according to the site conditions.
3. The new main shaft adopts high stiffness bearing structure, and its diameter has a 15% increase. The main load bearing's carrying surface has the double increase accordingly. More reliable running, less failure rate, ensure higher output of pellet mill.
4. Adopt the new positioning structure in main shaft frame, make roller disassemble easier, greatly reducing the
replacing time of rollers.
5. Gear oil lubrication and air cooling to make oil temperature lower, and pellet machine set with overpressure protection and undervoltage alarm, real-time display of circulating pressure to ensure long-term high-load operation of the pellet machine.
6. The roller adopts new technology, which has wear resisting material on surface welded by Robot. The lifetime of roller is improved and increased all-time.
7. The ring die of new pellet mill fully adopts advanced wear-resistant stainless steel, and advanced vacuum furnace quenching technology ensure the hardness same in outside and inside. The die hole is machined by
ultra-high speed gun drilling machine.
8. The press lock of die upgraded, and the whole die is fully covered by extended press locks, which increase the strength of die effectively and reduce the corrosion of bearing chamber by steam. The structure of press lock is changed, easier to be disassembled while locking the ring die.
9. The reducer bearings all adopt adjustable structure, which greatly reduce the impact of reducer's lifetime by
normal wear due to long-term working.
Common Raw Materials
Wood:pine; poplar; branches; bark; sawdust; shavings; etc.
Straw: corn straw; wheat straw; straw; rice husk; peanut shell; etc.
Waste:building templates; Demolition materials; sludge; etc.
Our Advantages
1.wood pellet machine can press high crude fiber biomass and chemical fertilizer materials into 2-8MM diameter pellets. it is specially fit for biomass waste from wheat straw or rice straw, corn stalk, rice husk , palm fiber ,palm shell or groundnut shell , very hard wood e.c.t, also can press fertilizer granules from animal manure, plant waste, chemical waste e.c.t ,before pelletizing , raw materials should crush into fine powder, humidity should control between 15%-20%.
2.wood pellet machine adopts both common ring die pellet machine and flat die pellet machine advantages ,working principle is roller assemble rotary, the ring die keep stable, producing high pressure and press very low adhesive biomass waste into high density pellets --- 1.1-1.4ton/m3. pellet length can be adjusted.
3.wood pellet machine contains hydraulic pump, which can adjust pressure between rollers and ring die to fit for different materials pressure ratio. when adjusted to the fit pressure, pressure will keep stable automatically, but other supplier pellet press need to adjust pressure manually each time .
4.sawdust pellet machine also contains automatical lubricate spare parts oil systems , which can lubricate spare parts oil automatically---- such as rollers, vertical shaft ,gears, bearings ,but other common supplier pellet machine needs to add oil each four working hours, very trouble to operate. this technology got national patent.
5.wood pellet machine adopts flat die pellet machine vertical feeding materials advantages , feed materials vertically and directly to pelletizing room , ring die and roller assemble works in horizontal type, but other supplier common ring die pellet machine only can feed materials from gear box side and its ring die works in vertical type, their feeding speed and working efficiency are both very low. Its spare parts can not produce large pressure, especially inner big shaft and bearings , if can not produce large pressure ,after long continuous hours , will be easily broken.
6.wood pellet machine has one ring die with two--layers : the top layer and bottom layer .when pellet machine works , Roller assemble will rotary ,toughing with ring die bottom layer ,the ring die keeps stable , once ring die bottom layer was broken , turn over it and make the top layer to bottom, then it will work secondly time . So one ring die can use two times .also the top and bottom layer hole dimension can be different, so one ring die can press into two different diameter pellets .but other supplier pellet machine just have one layer and only can press one dimension pellets.
7.wood pellet machine works with air fan and bags dust filter, on one hand, it will clean dust, very environmental protection . on the other hand, it can cool pellet machine inner spare parts heat temperature ,making sure long continuous working hours.
8.wood pellet machine all spare parts are made by CNC systems , through high technical heat treatment . we sold out more than 5000 sets XGJ pellet machine per year, have big discount for old customer, greatly welcome to askme for details.
Technical Parameters
| Product Parameters |
| Models |
Size(MM) |
Weight(T) |
Power(KW) |
Output(T/H) |
| XGJ560 |
2438*1584*1818 |
5.3 |
90 |
1-1.5 |
| 132 |
1.5-2 |
| 160 |
2-2.5 |
| XGJ850 |
2866*1830*2190 |
13.6 |
250 |
3-4 |
TIPS: The above parameters are for reference only. If you need to purchase, please consult with our sales personnel for accurate parameters.
Company Profile
Since its establishment in 1998, the company has more than 35 patents. We Are China's earliest and most professional sawdust particle machinery manufacturers. In addition, we have a wealth of experience in designing, manufacturing and installing complete particle production lines to meet the different needs of our customers. In addition, we have our own quality inspection and control center, and ensure that every part and every machine of good quality.
Packaging & Shipping
FAQ
Q: What is a pellet mill/pellet machine?
A: A pellet mill/pellet machine is a machine that takes raw materials and shapes it into pellet form for multiple uses.
Q:What kind of materials can be pelletized?
A: Materials such as wood wastes, saw dust, corn cobs/stover/stalks, straw, switch grass, other grasses, distillers grain, paper, etc. Basically, most Biomass materials that can be ground down to sawdust form can be pelletized.
Q. What is your payment term?
A: 30% of the total price shall be paid by telegraphic transfer as the down payment; 70% of the remaining payment shall be paid by telegraphic transfer prior to delivery.
Q: What documents you can offer?
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.
Q: Are you a trading company or a manufacturer?
A: We are a source factory, with our own machining shop, accessories can be supplied for a long time.
){kind=link}