GXP Series Hammer Mill can smash all kinds of raw materials of pellet feed, such as corn, sorghum, grain, legumes, broken cake pellet and other materials.
This series hammer mill adopts steel plate jointing structure, motor and rotor are installed on the same base, adopts dowel pin coupling transmission, balance the rotor check, can work be positive and negative, operation door interlocked safety device to ensure that the operation door can not open. Feed-in orifice is in the top of the hammer mill, can match various forms of feeder institutions, hammer arrange for symmetry.
The structure of the machine is reasonable and working reliable and easy to install. The vibration is low with high efficiency.
Model |
GXP65*27 |
GXP65*55 |
GXP65*75 |
GXP65*100 |
GXP130*55 |
Diameter of rotor(mm) |
650 |
650 |
650 |
1080 |
1080 |
Width of studio(mm) |
275 |
405 |
605 |
405 |
605 |
Rotate speed (r/min) |
2950 |
2950 |
2950 |
1480 |
1480 |
Spec of screener(mm) |
1340×270 |
1340×400 |
1340×600 |
2730×400 |
2730×600 |
Linear Velocity(m/s) |
100 |
100 |
100 |
84 |
84 |
Spec of hammer(mm) |
180×50×5 |
180×50×5 |
180×50×5 |
180×50×5 |
180×50×5 |
Qty of hammer(pie) |
24 |
48 |
72 |
72 |
160 |
Related power(kw) |
22-37 |
37-55 |
55-75 |
90-110 |
160 |
Output(t/h) |
0.5-1 |
1-2 |
1.5-2.5 |
2-3.5 |
3-5 |